Specification of Mitsubishi MMV Series
| Injection Unit | Units | 4000MMV (470) | 4000MMV (740) | 4000MMV (1100) | 4000MMV (2100) |
|---|---|---|---|---|---|
| Screw Diameter | mm | 150 | 175 | 200 | 250 |
| Theoretical Injection Capacity | cm3 | 13,200 | 21,000 | 31,400 | 61,300 | Injection Mass Polystyrene (PS) | g | 12,100 | 19,300 | 28,900 | 56,400 | Injection Mass Polyethylene (PE) | g | 9770 | 15,500 | 23,200 | 45,400 | Maximum Injection Pressure | MPa | 160.8(1640) | 156.9(1600) | Injection Rate | cm3/sec | 1275(1060) | 1450(1450) | 1675(1675) | 2300(2300) | Plasticizing Capacity Polystyrene (PS) | kg/hr | 810(675) | Plasticizing Capacity Polypropylene (PP) | kg/hr | 740(740) | 700(700) | 950(950) | Screw RPM | rpm | 118(98) | 87(87) | 59(59) | 44(44) |
| Clamping Unit | Units | 2500MMX (values) |
|---|---|---|
| Mould Clamping Force | kN (tonf) | 3200 X 2800 |
| Mould Opening Force | kN (tonf) | 2300 X 1850 |
| Mold Closing Speed (High) | m/min | 2700 |
| Mold Opening Speed (High) | m/min | 3700 | Platen Size (H x V) | mm | 1000 ~ 1900 | Tie-bar Space (H x V) | mm | 686(70) | Clamp Capacity Stroke | mm | 350 |
| General Unit | Units | 4000MMV (470) | 4000MMV (740) | 4000MMV (1100) | 4000MMV (2100) |
|---|---|---|---|---|---|
| Electric motor for pump | kW | 165 | 275 | 330 | 440 |
| Electric Heater capacity (380V/50Hz) | kW | 72.3 | 111.8 | 128.8 | 210.8 |
| Total hyd. system oil quantity[ In tank ] | L | 2900 | 4000 | 4500 | |
| Machine dimensions (L) | m | 13.8 | 15.2 | 15.8 | 17.6 |
| Machine dimensions (W) | m | 5.2 | 5.7 | 5.8 | 5.9 |
| Machine dimensions (H) | m | 4.2 | |||
| Shipping Mass | tons | 200 | 213 | 233 | 243 |
