3,000 Tons Machine Specifications
| Injection Unit | Units | 3000MMX (470) | 3000MMX (740) |
|---|---|---|---|
| Screw Diameter | mm | 150 | 175 |
| Theoretical Injection Volume | cm³ | 13,200 | 21,000 | Injection Shot Mass (PS) | g | 12,100 | 19,300 | Injection Shot Mass (PE) | g | 9,770 | 15,500 | Max. Injection Pressure | MPa(kgf/cm2) | 177(1,800) | 161()1,640) | Injection Speed | mm/sec | 76 | 66 | Injection Rate | cm³/sec | 1350 | 1595 | Plasticizing Capacity Polystyrene (PS) | kg/hr | 750 | 805 | Screw Speed | rpm | 110 | 90 |
| Clamping Unit | Units | 3000MMX (values) |
|---|---|---|
| Mould Clamping Force | kN (tonf) | 29,419(3,000) |
| Mould Opening Force | kN (tonf) | 2,353(240) |
| Mold Closing Speed (High) | m/min | 45 |
| Mold Opening Speed (High) | m/min | 45 | Platen Size (H x V) | mm | 2,550×2,500 | Clearance Between Tie Bars | mm | 2,050×1,900 | Max. Clamp Stroke | mm | 3,200 | Max. Daylight | mm | 4,200 | Mould Height | mm | 1,000~1,900 | Ejector Force | kN (tonf) | 490(50) | Ejector Stroke | mm | 400 |
| General Unit | Units | 3000MMX (470) | 3000MMX (740) |
|---|---|---|---|
| Electric motor for pump | kW | 200 | 223 |
| Electric Heater capacity (380V/50Hz) | kW | 84.8 | 111.7 |
| Total hyd. system oil quantity[ In tank ] | L | 3,700 [2,630] | 4,400 [3,230] |
| Machine dimensions (L) | m | 15.8 | 16.1 |
| Machine dimensions (W) | m | 4.8 | 4.8 |
| Machine dimensions (H) | m | 3.9 | 3.9 |
| Shipping Mass | tons | 153 | 162 |
