The Microgel line offers a unique, space-saving approach that directly addresses the needs of
plastics molders.
This compact, portable temperature control unit (TCU)/chiller combination (with a dual-zone option)
maintains precise, microprocessor-controlled temperature at your molding machines.
Compact, Portable & Precise Cooling
Save up to 60% of energy cost compared to central chillers – especially when you take
advantage of "free cooling" opportunities when conditions permit.
Prevent scrap with repeatable, precise, machine-side temperature control and optimal pressure
and flow for efficient, turbulent heat transfer.
Reduce equipment footprint with these multifaceted units, which take up about 1/3 the space
compared to using separate portable chillers and temperature control units.
Microgel RCM/RCD Series
The unique design of the Microgel RCM series includes a high performance refrigeration system and
precision temperature control unit one compact space-saving cabinet. The RCD series takes that
concept one step further, by incorporating two independent zones of temperature control. Each zone
can be operated at any temperature from 32 F to 194 F(0 to 90 C) for optimum flexibility and
convenience. Optional mold drain kits are available to evacuate molds without damaging compressed
air or expensive reversing pumps.
RCM series available in capacities from 1.3 to 60.4 tons(3,8 to 212 kW). RCD Capacity range
is 2.5 to 30.2 tons (from 8,8 to 106 kW).
Microgel RA Series
RAM And RAD series Microgel units are the same as the RCM/RCD Series, Except that they are air
cooled stand-alone units. This series is available in cpacities from 1.4 to 4.4. tons (5,3 to 17,2
KW), single or dual configuration.
Microgel RCP Series
RCP series Microgel single zone water cooled chillers are specifically designed for processes
requiring large flow rates and high pressures. Typical applications include Pet preform molding,
large part or high speed blow molding, high speed cavity injection molding and any other process
requiring large amounts of cooling water at elevated pressures. Operating range is from 45 F to 86 F
(From 7 C to 30 C) (without glycol).
Available in capacities from 8.8 to 127 tons(from 31 to 446 Kw)
Microgel RCX Series
Microgel RCX series chillers are designed for use with cooling tanks that are open to atmosphere,
typically plastic pipe/profile extrusion troughs. They are identical to the RCM series, but are
equipped with isolation heat exchangers and integral cooling bath recirculation pumps. Capacities
vary from 2.8 to 33.6 tons (from 9.8 to 118 kW).
Controls
All Microgel units are equipped with an advanced proprietary microprocessor control system with
proportional-integrallogic for extremely accurate control.
LKC Moulding Solutions Pvt.Ltd.
A-31, Ground Floor, Sector - 59, NOIDA, 201301 (U.P.) , INDIA. Mobile No.+91- 8800741922, 8958356479 Email:sales@lkc-mosoco.in