Injection Unit | Units | 1050MMX (160) | 1050MMX (240) |
---|---|---|---|
Screw Diameter | mm | 105 | 120 |
Theoretical Injection Volume | cm³ | 4,540 | 6,780 | Injection Shot Mass (PS) | g | 4,180 | 6,240 | Injection Shot Mass (PE) | g | 3,360 | 5,020 | Max. Injection Pressure | MPa(kgf/cm2) | 177(1,800) | 177(1,800) | Injection Speed | mm/sec | 106 | 97 | Injection Rate | cm³/sec | 920 | 1095 | Plasticizing Capacity Polystyrene (PS) | kg/hr | 580 | 655 | Screw Speed | rpm | 139 | 168 |
Clamping Unit | Units | 1050MMX (values) |
---|---|---|
Max. Mold Clamping Force | kN (tf) | 10,296(1,050) |
Mould Opening Force | kN (tf) | 608(62) |
Mold Closing Speed (High) | m/min | 45 |
Mold Opening Speed (High) | m/min | 45 | Platen Size (H x V) | mm | 1,900×1,900 | Clearance Between the Bars | mm | 1,300×1,300 | Max. Clamp Stroke | mm | 1,750 | Max. Daylight | mm | 2,250 | Mould Height | mm | 500~1,100 | Ejector Force | kN (tonf) | 196(20) | Ejector Stroke | mm | 200 |
General Unit | Units | 1050MMX (100) | 1050MMX (160) |
---|---|---|---|
Electric Motor Capacity | kW | 123 | 146 |
Electric Heater capacity (380V/50Hz) | kW | 50.7 | 53.5 |
Total hyd. system oil quantity[ In tank ] | L | 2.200 [1,700] | 2,600 [2,000] |
Machine dimensions (L) | m | 10.4 | 11.1 |
Machine dimensions (W) | m | 3.2 | 3.2 |
Machine dimensions (H) | m | 3.0 | 3.0 |
Shipping Mass | tons | 47 | 51 |
A-31, Ground Floor, Sector - 59, NOIDA,
201301 (U.P.) , INDIA.
Mobile No.+91- 8800741922, 8958356479
Email:sales@lkc-mosoco.in