1,600 Tons Machine Specifications
| Injection Unit | Units | 1600MMX (240) | 1600MMX (340) | 1600MMX (470) |
|---|---|---|---|---|
| Screw Diameter | mm | 120 | 135 | 150 |
| Theoretical Injection Volume | cm³ | 6,780 | 9,660 | 13,200 | Injection Shot Mass (PS) | g | 6,240 | 8,890 | 12,100 | Injection Shot Mass (PE) | g | 5,020 | 7,150 | 9,770 | Max. Injection Pressure | MPa(kgf/cm2) | - | 177(1,800) | - | Injection Speed | mm/sec | 97 | 88 | 76 | Injection Rate | cm³/sec | 1095 | 1260 | 1350 | Plasticizing Capacity Polystyrene (PS) | kg/hr | 655 | 700 | 750 | Screw Speed | rpm | 168 | 112 | 110 |
| Clamping Unit | Units | 1600MMX (values) |
|---|---|---|
| Max. Mold Clamping Force | kN (tf) | 15,690(1,600) |
| Mould Opening Force | kN (tf) | 1,225(125) |
| Mold Closing Speed (High) | m/min | 45 |
| Mold Opening Speed (High) | m/min | 45 | Platen Size (H x V) | mm | 2,500×2,000 | Clearance Between the Bars | mm | 1,850×1,520 | Max. Clamp Stroke | mm | 2,450 | Max. Daylight | mm | 3,200 | Mould Height | mm | 750~1,500 | Ejector Force | kN (tf) | 294(30) | Ejector Stroke | mm | 300 |
| General Unit | Units | 1600MMX (240) | 1600MMX (340) | 1600MMX (470) |
|---|---|---|---|---|
| Electric motor for pump | kW | 146 | 169 | 192 |
| Electric Heater capacity (380V/50Hz) | kW | 53.5 | 67.5 | 84.8 |
| Total hyd. system oil quantity[ In tank ] | L | 2,600 [2,000] | 3,100 [2,500] | - |
| Machine dimensions (L) | m | 12.6 | 12.8 | 13.9 |
| Machine dimensions (W) | m | 3.9 | 3.9 | 3.9 |
| Machine dimensions (H) | m | 3.3 | 3.3 | 3.3 |
| Shipping Mass | tons | 80 | 83 | 89 |
