1,300 Tons Machine Specifications
| Injection Unit | Units | 1300MMX (160) | 1300MMX (240) | 1300MMX (340) |
|---|---|---|---|---|
| Screw Diameter | mm | 105 | 120 | 135 |
| Theoretical Injection Volume | cm³ | 4,540 | 6,780 | 9,660 | Injection Shot Mass (PS) | g | 4,180 | 6,240 | 8,890 | Injection Shot Mass (PE) | g | 3,360 | 5,020 | 7,150 | Max. Injection Pressure | MPa(kgf/cm2) | - | 177(1,800) | - | Injection Speed | mm/sec | 106 | 97 | 88 | Injection Rate | cm³/sec | 920 | 1095 | 1260 | Plasticizing Capacity Polystyrene (PS) | kg/hr | 580 | 655 | 700 | Screw Speed | rpm | 139 | 168 | 112 |
| Clamping Unit | Units | 1300MMX (values) |
|---|---|---|
| Max. Mold Clamping Force | kN (tf) | 12,748(1,300) |
| Mould Opening Force | kN (tf) | 980(100) |
| Mold Closing Speed (High) | m/min | 45 |
| Mold Opening Speed (High) | m/min | 45 | Platen Size (H x V) | mm | 2,000×2,000 | Clearance Between the Bars | mm | 1,450×1,450 | Max. Clamp Stroke | mm | 2,150 | Max. Daylight | mm | 2,800 | Mould Height | mm | 650~1,300 | Ejector Force | kN (tf) | 294(30) | Ejector Stroke | mm | 300 |
| General Unit | Units | 1300MMX (160) | 1300MMX (240) | 1300MMX (340) |
|---|---|---|---|---|
| Electric Motor Capacity | kW | 123 | 146 | 169 |
| Electric Heater capacity （380V/50Hz） | kW | 50.7 | 53.5 | 67.5 |
| Total hyd. system oil quantity[ In tank ] | L | 2.200 [1,700] | - | 2,500 [2,000] |
| Machine dimensions (L) | m | 10.4 | 11.1 | 12.2 |
| Machine dimensions (W) | m | - | 3.5 | - |
| Machine dimensions (H) | m | - | 3.2 | - |
| Shipping Mass | tons | 63 | 66 | 69 |
