Injection Unit | Units | 3500MMX (470) | 3500MMX (740) |
---|---|---|---|
Screw Diameter | mm | 150 | 175 |
Theoretical Injection Volume | cm³ | 13,200 | 21,000 | Injection Shot Mass (PS) | g | 12,100 | 19,300 | Injection Shot Mass (PE) | g | 9,770 | 15,500 | Max. Injection Pressure | MPa(kgf/cm2) | 177(1,800) | 161()1,640) | Injection Speed | mm/sec | 76 | 66 | Injection Rate | cm³/sec | 1350 | 1595 | Plasticizing Capacity Polystyrene (PS) | kg/hr | 750 | 805 | Screw Speed | rpm | 110 | 90 |
Clamping Unit | Units | 3000MMX (values) |
---|---|---|
Mould Clamping Force | kN (tonf) | 34,323(3,500) |
Mould Opening Force | kN (tonf) | 2,353(240) |
Mold Closing Speed (High) | m/min | 45 |
Mold Opening Speed (High) | m/min | 45 | Platen Size (H x V) | mm | 2,550×2,500 | Clearance Between Tie Bars | mm | 2,050×1,900 | Max. Clamp Stroke | mm | 3,200 | Max. Daylight | mm | 4,200 | Mould Height | mm | 1,000~1,900 | Ejector Force | kN (tonf) | 490(50) | Ejector Stroke | mm | 400 |
General Unit | Units | 3000MMX (470) | 3000MMX (740) |
---|---|---|---|
Electric motor for pump | kW | 200 | 223 |
Electric Heater capacity (380V/50Hz) | kW | 84.8 | 111.7 |
Total hyd. system oil quantity[ In tank ] | L | 3,700 [2,630] | 4,400 [3,230] |
Machine dimensions (L) | m | 15.8 | 16.1 |
Machine dimensions (W) | m | 4.8 | 4.8 |
Machine dimensions (H) | m | 3.9 | 3.9 |
Shipping Mass | tons | 153 | 162 |
A-31, Ground Floor, Sector - 59, NOIDA,
201301 (U.P.) , INDIA.
Mobile No.+91- 8800741922, 8958356479
Email:sales@lkc-mosoco.in