Si-280 Machine Specifications
| Injection (Item) | Unit | 280 tons | |||||
|---|---|---|---|---|---|---|---|
| Screw Diameter | mm | 50 | 55 | 60 | 55 | 60 | 68 |
| Theoretical Injection Capacity | cm³ | 393 | 522 | 622 | 522 | 763 | 980 |
| High Pressure | |||||||
|---|---|---|---|---|---|---|---|
| Injection Unit | - | J370D | J450HD | ||||
| Injection Rate | cm³/s | 393 | 475 | 565 | 475 | 565 | 726 |
| Max. Injection Speed | mm/s | 200 | 200 | ||||
| Max. Injection Pressure | MPa | 235.0 | 196.0 | 166.6 | 235.2 | 196.0 | 151.9 |
| High Speed | |||||||
|---|---|---|---|---|---|---|---|
| Injection Unit | - | - | JH600D | ||||
| Injection Rate | cm³/s | - | 713 | 848 | 1090 | ||
| Max. Injection Speed | mm/s | - | 300 | ||||
| Max. Injection Pressure | MPa | - | 225.4 | 186.2 | 147.0 |
| Injection Unit | |||||||
|---|---|---|---|---|---|---|---|
| Recovery Rate(PS) | kg/h | 200 | 227 | 242 | 227 | 242 | 336 |
| Heater Capacity | kW | 13.5 | 16.7 | 19.5 | 16.7 | 19.5 | 24.8 |
| Nozzle Pressing Force | KN | 29.4 | 39.0 |
| Clamping | Double Toggle | |||||||
|---|---|---|---|---|---|---|---|---|
| Clamping Stroke | mm | 600 | ||||||
| Min./Max. Mold Height | mm | 300x650[750] | ||||||
| Tie Bar Clearance (H X V) | mm | 730x730 | ||||||
| Die Plate Size (H X V) | mm | 940x940 | ||||||
| Ejector Force | kN | 60 | ||||||
| Ejector Stroke | mm | 150 |
| Other | |||||||
|---|---|---|---|---|---|---|---|
| Machine Dimension (L) | mm | 6424 | 6539 | 6683 | 6539 | 6683 | 6851 |
| Machine Dimension (W x H) | mm | - | - | - | 1681x2083 | - |
| Power Source Main Breaker Capacity |
- A |
Three-Phase AC200V/200, 220V±10% 50Hz/60Hz 200 (250 JH600D:400) |
