Si-130 Machine Specifications

Injection (Item) Unit 130 tons
Screw Diameter mm 24 28 32 28 32 36 40 46
Theoretical Injection Capacity cm³ 43 69 90 69 103 147 201 266
Standard Unit
Injection Unit - - F75D -
Injection Rate cm³/s - 92 121 153 188 -
Max. Injection Speed mm/S - 150 -
Max. Injection Pressure MPa - 274.4 235.2 191.1 156.8 -
High Pressure
Injection Unit - D150D F200D
Injection Rate cm³/s 136 185 241 - 169 241 264 349
Max. Injection Speed mm/S 300 - 210
Max. Injection Pressure MPa 274.4 235.2 181.3 - 264.0 250.0 215.6 166.6
High Speed
Injection Unit - DH300D F200HD -
Injection Rate cm³/s 226 308 402 185 241 305 377 -
Max. Injection Speed mm/S 500 - 300 -
Max. Injection Pressure MPa 274.4 235.2 181.3 274.4 249.9 196.0 161.7 -
Super High Speed
Injection Unit - - - FH400D
Injection Rate cm³/s - - 322 407 503 665
Max. Injection Speed mm/S - - 400
Max. Injection Pressure MPa - - 264.0 250.0 215.6 166.6
Injection Unit
Recovery Rate(PS) kg/h 25.0 41.0 62.0 41.0 62.0 89.0 113.0 172.0
Heater Capacity kW 3.45 5.50 5.85 5.50 5.85 6.50 7.95 11.20
Nozzle Pressing Force KN 19.6 24.5
Clamping Double Toggle
Clamping Stroke mm 400
Min./Max. Mold Height mm 150/550
Tie Bar Clearance (H X V) mm 510x510
Die Plate Size (H X V) mm 690x690
Ejector Force kN 34.3
Ejector Stroke mm 100
Other
Machine Dimension (L) mm 4515 4515 4515 4584 4685(4735) 4768(4818) 4886(4936) 5059(5109)
Machine Dimension (W x H) mm - 1262x1734 - - - 1262x1734(1287x1734) - -
Power Source
Main Breaker Capacity
-
A
Three-Phase AC200V/200, 220V±10% 50Hz/60Hz
75 (DH300D/F200D/F200HD : 150, FH400D : 200)

    LKC Moulding Solutions Pvt.Ltd.

    A-31, Ground Floor, Sector - 59, NOIDA,
    201301 (U.P.) , INDIA.
    Mobile No.+91- 8800741922, 8958356479
    Email:sales@lkc-mosoco.in