Si-100 Machine Specifications
| Injection (Item) | Unit | 80 tons | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Screw Diameter | mm | 24 | 20 | 24 | 28 | 32 | 28 | 32 | 36 | 40 |
| Theoretical Injection Capacity | cm³ | 43 | 23 | 43 | 69 | 90 | 69 | 103 | 147 | 201 |
| Standard Unit | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Injection Unit | - | - | D75D | - | F75D | ||||
| Injection Rate | cm³/s | 94 | 136 | 185 | - | 92 | 121 | 153 | 188 |
| Max. Injection Speed | mm/s | 300 | - | 150 | |||||
| Max. Injection Pressure | MPa | 274.5 | 235.4 | 182.3 | - | 274.4 | 235.2 | 191.1 | 156.8 |
| High Pressure | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Injection Unit | - | - | D150D | - | F200D | ||||
| Injection Rate | cm³/s | - | 136 | 185 | 241 | - | 169 | 214 | 264 |
| Max. Injection Speed | mm/s | 300 | - | 210 | |||||
| Max. Injection Pressure | MPa | - | 274.4 | 235.2 | 181.3 | - | 264.0 | 250.0 | 215.6 |
| High Speed | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Injection Unit | - | - | DH300D | F200HD | |||||
| Injection Rate | cm³/s | - | 226 | 308 | 402 | 185 | 241 | 305 | 377 |
| Max. Injection Speed | mm/s | 500 | - | 300 | |||||
| Max. Injection Pressure | MPa | - | 274.4 | 235.2 | 181.3 | 274.4 | 249.9 | 196.0 | 161.7 |
| Speed High Speed | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Injection Unit | - | CH450D | CH300D(D150HD) | - | - | ||||
| Injection Rate | cm³/s | 452 | 200(157) | 317(226) | 431(308) | - | - | ||
| Max. Injection Speed | mm/s | 1000 | 700(500) | - | - | ||||
| Max. Injection Pressure | MPa | 294.0 | 254.8(235.2) | 235.2(215.6) | 182.3(156.8) | - | - |
| Injection Unit | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Recovery Rate(PS) | kg/h | 25.0 | 13.9 | 25.0 | 41.0 | 62.0 | 41.0 | 62.0 | 89.0 | 113.0 |
| Heater Capacity | kW | 3.45 | 2.58 | 3.45 | 5.50 | 5.85 | 5.50 | 5.85 | 6.50 | 7.95 |
| Nozzle Pressing Force | KN | 19.6 | 24.5 |
| Clamping | Double Toggle | |||||||
|---|---|---|---|---|---|---|---|---|
| Clamping Stroke | mm | 360 | ||||||
| Min./Max. Mold Height | mm | 150X510 | ||||||
| Tie Bar Clearance (H X V) | mm | 460X460 | ||||||
| Die Plate Size (H X V) | mm | 630X630 | ||||||
| Ejector Force | kN | 24.5 | ||||||
| Ejector Stroke | mm | 100 |
| Other | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Machine Dimension (L) | mm | 4132 | 4130 | 4130 | 4130<4163> | 4154<4201> | 4380 | 4481 | 4564 | 4682 |
| Machine Dimension (W x H) | mm | - | 1120x1663 | 1120x1667 | - | 1207x1667 | - | - | - |
| Power Source Main Breaker Capacity |
- A |
Three-Phase AC200V/200, 220V±10% 50Hz/60Hz 75(CH300D/DH300D/F200D/F200HD : 150, CH450D : 200) |
LKC Moulding Solutions Pvt.Ltd.
A-31, Ground Floor, Sector - 59, NOIDA,
201301 (U.P.) , INDIA.
Mobile No.+91- 8800741922, 8958356479
Email:sales@lkc-mosoco.in