Injection Unit | Units | 3000 - 3500emII (370) |
---|---|---|
Screw Diameter | mm | 155 |
Theoretical Injection Capacity | cm3 | 13,200 | Injection Mass Polystyrene (PS) | g | 12,100 | Injection Mass Polyethylene (PE) | g | 9,770 | Maximum Injection Pressure | MPa | 177(1,800) | Maximum Holding Pressure | (kgf/cm2) | 147(1,500) | Injection Rate | cm3/sec | 2,030 | Plasticizing Capacity Polystyrene (PS) | kg/hr | - | Plasticizing Capacity Polypropylene (PP) | kg/hr | 1,000 | Screw Speed | rpm | 167 | Injection Power | kW(PS) | 359(488) | Injection Speed | mm/s | 115 | Nozzle Touch Force | kN(tf) | 98(10.0) | Screw L/D | - | 22 |
Clamping Unit | Units | 3000 - 3500emII (values) |
---|---|---|
Mould Clamping Force | kN (tonf) | 29,420(3,000) / 34,320(3,500) |
Mould Opening Force | kN (tonf) | 1,824(186) |
Mould Open/Close Speed | m/min | 50 | Platen Size (H x V) | mm | 3,200×2,500 | Tie-bar Space (H x V) | mm | 2,050×1,900 | Max. Clamp Stroke | mm | 2,700 | Max. Daylight | mm | 3,700 | Mould Thickness | mm | 1,000~1,900 | Ejector Force | kN (tonf) | 392(40) | Ejector Stroke | mm | 350 | Ejector Speed(forward/back) | m/min | 12.5 | Max. Mould Weight | t | 30 |
General Unit | Units | 3000 - 3500emII (340) |
---|---|---|
Heater capacity | kW | 84.8 |
Machine dimensions (L x W x H) | m | 15.2×4.8×4.0 |
Weight | ton | 183 |
A-31, Ground Floor, Sector - 59, NOIDA,
201301 (U.P.) , INDIA.
Mobile No.+91- 8800741922, 8958356479
Email:sales@lkc-mosoco.in