Injection Unit | Units | 2500emII (340) |
---|---|---|
Screw Diameter | mm | 135 |
Theoretical Injection Capacity | cm3 | 9,660 | Injection Mass Polystyrene (PS) | g | 8,890 | Injection Mass Polyethylene (PE) | g | 7,150 | Maximum Injection Pressure | MPa | 177(1,800) | Maximum Holding Pressure | (kgf/cm2) | 147(1,500) | Injection Rate | cm3/sec | 1,790 | Plasticizing Capacity Polystyrene (PS) | kg/hr | 1,010 | Plasticizing Capacity Polypropylene (PP) | kg/hr | 610 | Screw Speed | rpm | 132 | Injection Power | kW(PS) | 316(429) | Injection Speed | mm/s | 125 | Nozzle Touch Force | kN(tf) | 98(10.0) | Screw L/D | - | 22 |
Clamping Unit | Units | 2500emII (values) |
---|---|---|
Mould Clamping Force | kN (tonf) | 24,517(2,500) |
Mould Opening Force | kN (tonf) | 1,549(158) |
Mould Open/Close Speed | m/min | 55 | Platen Size (H x V) | mm | 2,550×2,300 | Tie-bar Space (H x V) | mm | 2,000×1,650 | Max. Clamp Stroke | mm | 2,700 | Max. Daylight | mm | 3,500 | Mould Thickness | mm | 800~1,700 | Ejector Force | kN (tonf) | 392(40) | Ejector Stroke | mm | 350 | Ejector Speed(forward/back) | m/min | 12.5 | Max. Mould Weight | t | 30 |
General Unit | Units | 2500emII (340) |
---|---|---|
Heater capacity | kW | 68.3 |
Machine dimensions (L x W x H) | m | 13.7×4.5×3.4 |
Weight | ton | 136 |
A-31, Ground Floor, Sector - 59, NOIDA,
201301 (U.P.) , INDIA.
Mobile No.+91- 8800741922, 8958356479
Email:sales@lkc-mosoco.in