Injection Unit | Units | 2000emII (240) | 2000emII (340) |
---|---|---|---|
Screw Diameter | mm | 120 | 135 |
Theoretical Injection Capacity | cm3 | 6,780 | 9,660 | Injection Mass Polystyrene (PS) | g | 6,240 | 8,890 | Injection Mass Polyethylene (PE) | g | 5,020 | 7,150 | Maximum Injection Pressure | MPa | 177(1,800) | 177(1,800) | Maximum Holding Pressure | (kgf/cm2) | 147(1,500) | 147(1,500) | Injection Rate | cm3/sec | 1,415 | 1,790 | Plasticizing Capacity Polystyrene (PS) | kg/hr | 785 | 1,010 | Plasticizing Capacity Polypropylene (PP) | kg/hr | 475 | 610 | Screw Speed | rpm | 138 | 132 | Injection Power | kW(PS) | 250(340) | 316(429) | Injection Speed | mm/s | 125 | 125 | Nozzle Touch Force | kN(tf) | 59 (6.0) | 98(10.0) | Screw L/D | - | 22 | 22 |
Clamping Unit | Units | 2000emII (values) |
---|---|---|
Mould Clamping Force | kN (tonf) | 19,613(2,000) |
Mould Opening Force | kN (tonf) | 1,549(158) |
Mould Open/Close Speed | m/min | 60 | Platen Size (H x V) | mm | 2,500×2,250 | Tie-bar Space (H x V) | mm | 1,850×1,650 | Max. Clamp Stroke | mm | 2,400 | Max. Daylight | mm | 3,200 | Mould Thickness | mm | 800~1,500 | Ejector Force | kN (tonf) | 294(30) | Ejector Stroke | mm | 250 | Ejector Speed(forward/back) | m/min | 15 | Max. Mould Weight | t | 30 |
General Unit | Units | 2000emII (160) | 2000emII (240) |
---|---|---|---|
Heater capacity | kW | 53.6 | 68.3 |
Machine dimensions (L x W x H) | m | 12.7×4.0×3.4 | 13.3×4.3×3.4 |
Weight | ton | 105 | 110 |
A-31, Ground Floor, Sector - 59, NOIDA,
201301 (U.P.) , INDIA.
Mobile No.+91- 8800741922, 8958356479
Email:sales@lkc-mosoco.in