1,600 Tons Machine Specifications
| Injection Unit | Units | 1600emII (160) | 1600emII (240) |
|---|---|---|---|
| Screw Diameter | mm | 105 | 120 |
| Theoretical Injection Capacity | cm3 | 4,540 | 6,780 | Injection Mass Polystyrene (PS) | g | 4,180 | 6,240 | Injection Mass Polyethylene (PE) | g | 3,360 | 5,020 | Maximum Injection Pressure | MPa | 177(1,800) | 177(1,800) | Maximum Holding Pressure | (kgf/cm2) | 147(1,500) | 147(1,500) | Injection Rate | cm3/sec | 1,385 | 1,415 | Plasticizing Capacity Polystyrene (PS) | kg/hr | 630 | 785 | Plasticizing Capacity Polypropylene (PP) | kg/hr | - | 475 | Screw Speed | rpm | 152 | 138 | Injection Power | kW(PS) | 244 (332) | 250 (340) | Injection Speed | mm/s | 160 | 125 | Nozzle Touch Force | kN(tf) | 59 (6.0) | 59 (6.0) | Screw L/D | - | 22 | 22 |
| Clamping Unit | Units | 1600emII (values) |
|---|---|---|
| Mould Clamping Force | kN (tonf) | 15,691(1,600) |
| Mould Opening Force | kN (tonf) | 971(99) |
| Mould Open/Close Speed | m/min | 60 | Platen Size (H x V) | mm | 2,500×2,500 | Tie-bar Space (H x V) | mm | 1,850×1,520 | Max. Clamp Stroke | mm | 2,400 | Max. Daylight | mm | 3,200 | Mould Thickness | mm | 800~1,500 | Ejector Force | kN (tonf) | 294(30) | Ejector Stroke | mm | 250 | Ejector Speed(forward/back) | m/min | 15 | Max. Mould Weight | t | 25 |
| General Unit | Units | 1600emII (160) | 1600emII (240) |
|---|---|---|---|
| Heater capacity | kW | 47.6 | 53.6 |
| Machine dimensions (L x W x H) | m | 12.3×3.9×3.3 | 12.5×3.9×3.3 |
| Weight | ton | 84 | 88 |
